Administrative Manual January 2025

Part 4. Appendices 4.5 Checklists

Construction Plan Approval for a Site Plan (Major or Minor) Submittal Checklist (use this checklist for concurrent review applications) For each listed item, check (√) if provided, write “n/a” if the feature does not exist or is not proposed, and write “w” if a waiver from the requirement is justified because it is unnecessary in the particular case to determine compliance with applicable regulations. Staff Use Only

√, n/a, or w

√, n/a, or w

Application Submittal Requirement

10 Detail of commercial container enclosure(s), including the opaque gate 11 Location of all utilities attached to the building

Add the following tables for each structure (fill in blanks)

Area of Façade Walls Area of Window and Doors Net Total Façade Wall Area[1]

______________ sf ______________ sf

______________ sf [1] Net Total Façade Wall Area is the Area of Façade Walls minus Area of Window and Doors

12

Area of predominant net façade material ____________ sf ____________% Area of non-predominant net façade material ____________ sf ____________%

13 For an office building greater than two feet in height, provide building footprint demonstrating the minimum corner requirement is met. (only required if this method of compliance it proposed) Provide a scaled drawing, similar to the one below, for all buildings that have at least one side greater than 100 feet in length.

14

Note: This is not to scale.

15 Demonstrate façade walls have no less than three of the following: color change; texture change; material change; or an expression of architectural or structural bays through a change in plane no less than 12 inches in width. Provide the following table on each applicable elevation sheet demonstrating compliance with ground floor features along no less than 60% of the horizontal length of the wall. A table is required for each side of the building(s) adjacent to a public r/w.

Total horizontal length of the wall: ______________ lf Horizontal length of the (add feature): ______________ lf Horizontal length of the (add feature): ______________ lf (examples of features: windows, awnings) Total horizontal length of all features: ______________ lf =_______% of the wall

16

Morrisville, NC

May 29, 2020

Administrative Manual

Page 22