Morrisville UDO Administrative Manual, August 1, 2018 version
Part 4 Appendices 4.5 Checklists
Construction Plan Approval for a Site Plan (Major or Minor) Submittal Checklist (use this checklist for concurrent review applications) For each listed item, check (√) if provided, write “n/a” if the feature does not exist or is not proposed, and write “w” if a waiver from the requirement is justified because it is unnecessary in the particular case to determine compliance with applicable regulations. Staff Use Only
√, n/a, or w
√, n/a, or w
Application Submittal Requirement
Add the following tables for each structure (fill in blanks)
Area of Façade Walls
______________ sf ______________ sf
Area of Window and Doors Net Total Façade Wall Area 1
______________ sf 1 Net Total Façade Wall Area is the Area of Façade Walls minus Area of Window and Doors
12
Area of predominant net façade material ____________ sf ____________% Area of non-predominant net façade material ____________ sf ____________%
13 For an office building greater than two feet in height, provide building footprint demonstrating the minimum corner requirement is met. (only required if this method of compliance it proposed) Provide a scaled drawing, similar to the one below, for all buildings that have at least one side greater than 100 feet in length.
14
Note: This is not to scale.
15 Demonstrate façade walls have no less than three of the following: color change; texture change; material change; or an expression of architectural or structural bays through a change in plane no less than 12 inches in width. Provide the following table on each applicable elevation sheet demonstrating compliance with ground floor features along no less than 60% of the horizontal length of the wall. A table is required for each side of the building(s) adjacent to a public r/w. Total horizontal length of the wall: ______________ lf
16
Horizontal length of the (add feature): ______________ lf Horizontal length of the (add feature): ______________ lf (examples of features: windows, awnings) Total horizontal length of all features: ______________ lf =_______% of the wall
August 1, 2018
Morrisville, NC
Page 4-32
Administrative Manual
Made with FlippingBook - Online magazine maker