DRAFT Comprehensive Transportation Plan Update: February 23, 2018 version

Different pedestrian light types to consider are pedestrian height posts (15-foot poles) and pedestrian bollards. The pedestrian posts will

provide more adequate light than a bollard light but bollard light can provide a more pleasing aesthetic. Due to using full cut-off fixtures,

several bollards would need to be used to provide the equivalent light level of one light post and would have to be very close to the path to

adequately illuminate it. Another element of lighting is the power source. Pedestrian lights can be solar powered or hard wired. Solar power

could be preferable when utility collection is difficult or when alternative energy sources are desired. The amount of tree canopy does need

to be factored into the effectiveness of solar power.

Landscaping & Amenities LANDSCAPING Landscaping can enhance the experience on a multi-use path. It can provide shade, shelter, and serve as a natural privacy screen. When

possible, the path needs to be designed and constructed to protect, preserve, and maintain the existing native vegetation.

Guidelines  If the native vegetation is impacted or was sparse, trees and shrubs can be planted in logical places along the path. The only

vegetation along the shoulder must be grass. All trees and shrubs must be planted 5 feet offset from outside edge of the path

shoulder.

 Native species will be more tolerant and require less maintenance. The topography and existing soils will affect the type of plants

chosen.

 It is recommended that shrubs adjacent to the path be a maximum of 24 inches in height as to not obstruct the line of sight.

 Canopy trees need to be trimmed to provide a minimum of 8 feet of vertical clearance and be placed as to not obstruct path

lighting if installed.

AMENITIES As noted in the Trailhead section, the following amenities must be considered throughout the path and are recommendations:

Trash Cans



o Trash cans must be placed at each trailhead and seating area. One trash can must be placed per every two picnic tables and one per two benches.

o Trash cans must be a minimum of 3 feet from the path edge and be secured to a 12- by 24-inch concrete pad.

o Trash cans need to be accessible by all users and maintenance personnel.

o Trash cans could provide combo trash/recycling containers.  Benches

o Benches need to be a minimum of 3 feet from the path edge and secured to a minimum 10- by 6-foot concrete pad.

o Benches need to be placed at trailheads and along the multi-use path where appropriate. If benches are placed along the path, ½- to 1-mile spacing is recommended. o Benches must be placed at interesting views, close to interpretive elements, or in areas with shade or sheltered from seasonal winds.  Bicycle Racks

o Bicycle racks must be placed at trailheads, restrooms, points of interest, and rest areas.

o Racks must be shaped to allow users to lock the frame to one or both wheels with a U-lock.

o The nearest post of the rack must be a minimum of 4 feet from the path edge.

o Adjacent racks need to be a minimum of 3 feet apart.

o The rack must be secured to a concrete or asphalt pad.  Water Fountains

o Water fountains need to be located near restrooms, trailheads, larger rest areas, and other public gathering places along the path. Installation of water fountains will be dependent on available utility connections.

o Water fountains must be a minimum of 5 feet from the path edge and installed on a concrete pad.

o Water foundations must be accessible by all path users and be ADA compliant.  Bicycle Repair Stations

o Bicycle repair stations are recommended in areas with high activity as they tend to be a target for theft and vandalism.

o Bicycle repair stations need to be offset a minimum of 5 feet from the path edge and on a concrete or asphalt pad.

o A structural engineer must design the concrete pad.

F-20 | P A G E D R A F T | 0 2 / 2 3 / 2 0 1 8