Morrisville UDO Administrative Manual, 11/1/18 version

Part 4 Appendices 4.5 Checklists

Bulletin Drawing

Bulletin Drawing Submittal Checklist For each listed item, check (√) if provided, write “n/a” if the feature does not exist or is not proposed, and write “w” if a waiver from the requirement is justified because it is unnecessary in the particular case to determine compliance with applicable regulations. Staff Use Only √, n/a, or w Application Submittal Requirement √, n/a, or w A Documents to be Submitted

1

This completed checklist

2

Development Application

3

Completed fee schedule and fee payment

4 A brief narrative explanation of the circumstances necessitating the change

5 One 11 " x17 " paper copy – sealed and prepared by a qualified design professional (see 4.1.3 for a sample bulletin drawing) 6 Electronic copy of plans – either via CD or PDF

B

Bulletin Drawing Requirements

1 Features of the existing construction drawing displayed in the background of the drawing in gray-scale. 2 Proposed changes should be highlighted or clouded with brief, narrative descriptions or call- outs for each change 3 Where applicable, provide both existing and proposed drawings/illustrations for comparison 4 Where applicable, a table should be included to show existing and proposed fenestration material percentages for any elevations being changed 5 Where applicable, existing and proposed tables should be provided for any changes to the approved landscape plan and plant schedule 6 Where applicable, the drawing should provide a reference to relevant construction detail(s) on the approved Construction Plans. 7 Where applicable, detail/manufacturer sheets should be provided with drawings and include the title block information below 8 Title block

“Bulletin Drawing #__” and drawing date on each sheet Reference to existing approved construction drawing to be altered, including the name, drawing number, and approval date. Town project/file number near the bottom right corner of each sheet

9

North arrow

10

Graphic and numeric scale.

11 Bulletin approval block near bottom right corner of each drawing sheet (see Section 4.7.12)

C

Note

1 A Bulletin Drawing should be submitted for a single change occurring, often only requiring one or two sheets to demonstrate. Modifications with multiple changes and amendments to the approved site plan/construction drawings will require a more in-depth review and will need to be submitted as a Minor Modification.

Morrisville, NC

November 1, 2018

Administrative Manual

Page 4-57