Morrisville Administrative Manual_September 2023

Part 4. Appendices 4.5 Checklists

Construction Plan Approval for a Preliminary Subdivision Plat Approval (Type 1 or Type 2) Checklist (use this checklist for combined review applications) For each listed item, check (√) if provided, write “n/a” if the feature does not exist or is not proposed, and write “w” if a waiver from the requirement is justified because it is unnecessary in the particular case to determine compliance with applicable regulations. Staff Use Only √, n/a, or w Application Submittal Requirement √, n/a, or w • Existing and proposed utilities

2 Pavement marking and street signage plan in accordance with the Manual of Uniform Traffic Control Devices and/or NCDOT standards 3 Cross section 4 Pavement design 5 Payment in lieu calculations and associated exhibits P Details Sheet 1 Fence (see Section 5.14, Fences and Walls, of UDO) 2 Standard details Q Building Elevations (multifamily dwellings only) 1 Label all building materials and colors (façade, cornices, awnings, storefronts, etc.) 2 Label each side of the building labeled at north, south, east, west 3 Label the number of stories 4 Label the overall building height and the height of each story 5 The height of structures above the roofline (e.g. parapets and towers) 6 The scale of the elevations 7 Location of each on-building light fixture 8 Location of roof-mounted mechanical equipment including proposed screening and a shadow (height and width) of the equipment 9 Location of screen wall for ground level mechanical equipment including shadow (height and width) of the equipment 10 Detail of commercial container enclosure(s), including the opaque gate 11 Location of all utilities attached to the building

Add the following tables for each building and individual façade wall (fill in blanks)

Area of Façade Walls

______________ sf ______________ sf

Area of Window and Doors Net Total Façade Wall Area1 ______________ sf [1] Net Total Façade Wall Area is the Area of Façade Walls minus Area of Window and Doors

12

Area of predominant net façade material ____________ sf ____________% Area of non-predominant net façade material ____________ sf ____________%

13 Location and dimensions of proposed dumpster, recycling container, and/or trash compactor(s) R Building Elevations – Type II Subdivisions 1 Elevations demonstrating compliance with the Voluntary Design Guidelines (façade type a, b, c, etc) 2 Plat map corresponding with the elevations showing the locations of each type of unit (a, b, c, etc) S Stormwater Report 1 Runoff Calculations report for all proposed storm drainage structures including, but not limited to culverts, storm drain systems, inlets, ditches, open channels, BMPs, outlet protection, etc. The report shall be sealed and signed by a registered North Carolina Professional Engineer. 2 Narrative description of Existing Conditions, Natural Resource Inventory, Stormwater Management Plan, calculations (methods, variables, assumptions, etc.) and results. 3 Hardcopy & .xls file of completed Storm-EZ form 4 Maps • Pre- and Post-Development Drainage Area Maps (on full-size plan sheet)

Morrisville, NC

August 7, 2023

Administrative Manual

Page 43