Morrisville UDO Administrative Manual - May 2020

Part 4. Appendices 4.5 Checklists

New Telecommunication Facility Construction Plan Approval for a Site Plan (Major or Minor) Submittal Checklist For each listed item, check (√) if provided, write “n/a” if the feature does not exist or is not proposed, and write “w” if a waiver from the requirement is justified because it is unnecessary in the particular case to determine compliance with applicable regulations. Staff Use Only √, n/a, or w Application Submittal Requirement √, n/a, or w • Length (linear feet) of buffer • Number of required plantings (including supporting calculation) • Number of provided plantings • Location, height, material, and graphic of fences/walls proposed as buffer screening • Location, width, and height of proposed berms • Location and width of landscape buffer around compound area • Table for compound buffer that includes: • Length (linear feet) of buffer • Width of buffer • Number of required plantings (including supporting calculation) • Number of provided plantings • Location, height, material, and graphic of fences/walls proposed as buffer screening • Location, width, and height of proposed berms

15 Location and width of perimeter landscaping strips between Vehicle Use Areas (VUAs) and adjacent streets and property lines (See Section 5.12.4.C, Perimeter Landscaping, of UDO.) 16 Location, height, and material of any fence, berm, and wall existing or proposed 17 VUA table that includes: • Square footage of VUA area • Number of required plantings, with supporting calculation (See Section 5.12.4.D, Interior Landscaping Standards, of UDO.) • Number of provided plantings 18 Location of planting strips and/or tree pits proposed to contain required street trees (See Section 5.12.6, Street Trees in the TOD and MS Districts, of UDO.) 19 Tree Protection Areas 20 The following note: All landscaping shall be maintained in perpetuity 21 The following note: All hotboxes and other on ground/free standing mechanical equipment shall be screened with vegetation prior to the issuance of a Certificate of Compliance/Occupancy K Lighting Plan 1 Location of proposed lighting fixtures (See Section 5.15, Exterior Lighting, of UDO). Pole details, including height, color, and manufacturer 2 Fixture details, including color, graphic, shape, wattage, IESNA cutoff classification, lumen rating, and manufacturer. This includes both pole and fixtures affixed to building. L Details Sheet 1 Fence (see Section 5.14, Fences and Walls, of UDO) 2 Standard details M Elevations

Facility Elevations 1 Label all facility materials and colors 2 Label each side of the facility at north, south, east, west 3 Label the overall facility height 4 The scale of the elevations 5 Location of each on-facility light fixture (not exceeding FAA minimum standards)

6 Location of screen wall for ground level mechanical equipment including shadow (height and width) of the equipment Compound Building Elevations 1 Label all building materials and colors (façade, cornices, awnings etc.) 2 Label each side of the building at north, south, east, west 3 Label the number of stories

Morrisville, NC

May 29, 2020

Administrative Manual

Page 4-69