Morrisville UDO Administrative Manual, version August 1, 2018

Part 4 Appendices 4.5 Checklists

Sign Permit Submittal Checklist For each listed item, check (√) if provided, write “n/a” if the feature does not exist or is not proposed, and write “w” if a waiver from the requirement is justified because it is unnecessary in the particular case to determine compliance with applicable regulations.

Staff Use Only

√, n/a, or w

√, n/a, or w

Application Submittal Requirement

5 Projection from building

6 Image of sign

E Bracket-Mounted Sign (Requirements for Scaled Drawings)

1 Number of signs

2 Sign dimensions

3 Clearance height

4 Projection from building

5 Image of sign

F Awning-Mounted Sign (Requirements for Scaled Drawings)

1 Number of signs

2 Area per face sign

3 Height of the sign

4 Percentage of wall coverage

5 Image of sign

G Marquee Sign (Requirements for Scaled Drawings)

1 Number of signs

2 Area per face sign

3 Height of the sign

4 Clearance height

5 Image of sign

H Sandwich Board Sign (Requirements for Scaled Drawings)

1 Number of signs

2 Area per face sign

3 Image of sign

I Address (Requirements for Scaled Drawings)

1 Area per face sign

2 Height of the sign

3 Image of sign

J Contractor/Construction Sign (Requirements for Scaled Drawings)

1 Number of signs

2 Area per face sign

3 Height of the sign

4 Image of sign

K Residential Development Identification Sign (Requirements for Scaled Drawings)

1 Number of signs

2 Area per face sign

3 Height of the sign

August 1, 2018

Morrisville, NC

Page 4-72

Administrative Manual