Morrisville UDO - June 2017 version
Article 5: Development Standards Section 5.10. Parking and Loading 5.10.6. Off-Street Parking Arrangement and Design
Table 5.10.6.F: Minimum Dimensions for Vehicle Parking Spaces and Aisles
Minimum Double Row Parking Bay Width (feet)
Minimum Aisle Width (feet) [4][5][6]
Minimum Parking Space Width (feet)
Minimum Parking Row Depth (feet) [3]
Parking Angle (degrees) [1]
Two- Way
One-Way Two-Way One-Way
A [7]
B
C
D [8]
D [9]
E
E
Parallel
20
9
12
23
30
41
30
9
17
14
n/a
48
n/a
45
9
19
15
n/a
53
n/a
60
9
20
16
n/a
56
n/a
90
9
18
20
23
56
59
No Parking
n/a
n/a
20
23
n/a
n/a
Notes: [1] The same angle shall be used along the full length of one side of a parking bay, though different angles may be used on each side of a double-loaded parking bay. [2] With the exception of parallel parking spaces, the width of a parking space shall not exceed 12 feet. [3] Where a space includes a wheel stop, the length of the space shall be increased by 1.5 feet. [4] Where the angle is other than 90 degrees or 0 degrees (parallel), the drive aisle shall be designed for one-way traffic. [5] A greater aisle width may be necessary to Fire Prevention Code requirements. [6] Where each side of a double loaded parking bay uses different parking space/drive aisle angles, the drive aisle shall comply with the greater applicable minimum drive aisle width standard. [7] Letters correspond to dimension measurement lines in Figure 5.10.6.F: Minimum Dimensions for Vehicle Parking Spaces and Aisles . [8] The width of a one-way drive cannot exceed more than three feet over the required minimum. [9] The width of a two-way drive aisle shall not exceed 30 feet.
Figure 5.10.6.F: Minimum Dimensions for Vehicle Parking Spaces and Aisles . (Ord. No. 2014-022, 06/24/2014; Ord. No. 2016-001, 05/10/2016)
Morrisville, NC
June 23, 2017
Unified Development Ordinance
Page 5-111
Made with FlippingBook Annual report