Morrisville Unified Development Ordinance - February 2021.2

Residential Transition (RT) District

3.5.6.

Residential Transition (RT) District A. Purpose

The Residential Transition District accommodates a range of housing choices within proximity to Town Center amenities such as parks, historic sites, and commercial areas. This district allows moderate residential densities in order to provide a transition between the Aviation Parkway corridor and the Residential Neighborhood Preservation District.

B. Principal Intensity and Dimensional A, etc. are symbols used in the illustrations showing application of dimensional standards

Cross References

Art. 4: Use Standards Art. 5: Development Standards Sec. 5.7.2.A Sec. 5.9.6

Single- Family

Single- Family

Develop- ment Incentives [ 1 ]

Pocket Neighbor- hood

Multi- family Dwellings

Bungalow Court

Other Uses

Detached Dwellings

Attached Dwellings

Lot Standards

Sec. 5.9.7

Min. Net Lot Area (sf) A Min. Lot Width (ft) Min. Net Density (du/ac) Max. Net Density (du/ac) Max. Lot Coverage (%)

n/a 35 4.0 8.0 65

2,500

n/a

n/a 20 4.0 8.0 70

n/a 50 4.0 8.0 50

n/a

n/a n/a n/a

Art. 6: Riparian Buffers

35

35

50

Art. 7: Stormwater Management

n/a n/a

n/a n/a

n/a n/a

10.0

75

85

65

n/a

Setbacks B 1

Alley- loaded

10 [2]

n/a

8 [5]

10 [2]

n/a

n/a

n/a

Min. Front (ft)

B 2

Other

20 [3]

10 [6]

8 [5]

20 [3]

25 [3]

30 [3]

n/a

C Min. Side (ft)

5 [4]

0 [4]

0 [4]

0

15

10 [4]

n/a n/a

D Min. Corner Side (ft)

same as minimum front 10 [6]

same as minimum front

Alley- loaded

E 1 Min. Rear (ft)

6

n/a

6

6

n/a

n/a

n/a

E 2

Other

15

20 [6]

20

15

15

15

n/a

Building Standards F Max. Structure Height (ft) G Min. Building Separation (ft)

35

35

35

35

35

35

n/a

n/a

8

8

20

n/a

n/a

n/a

Notes: sf = square feet; ft = feet; du = dwelling unit; ac = acre; % = percent; n/a = not applicable [1] Available only in a Conditional-Residential Transition District approved with the provision of compensating public benefits (see Section 3.1.4). [2] Setbacks also apply to residential developments with detached front-loaded garages located to the rear of the principal structure. [3] For infill development, see Section 11.4.2.B, Reduction of Minimum Front Setbacks to Block Face Average. [4] A minimum of 15 feet is required along lot lines shared with lots containing single-family detached residential uses built before 2010. [5] The front setback is measured from the common open space. [6] For single family detached dwellings located in a bungalow court, the front setback is measured from the public street fronting the development or from the lot line adjacent to the shared driveway for the lots not fronting a public street. (Ord. No. 2014-022, 06/24/2014; Ord. No. 2016-001, 05/10/2016)

Morrisville, NC

February 1, 2021

Unified Development Ordinance

Page 3-39