Morrisville Unified Development Ordinance - February 2021.2

Article 5: Development Standards Section 5.9. Building Configuration and Design 5.9.5. Building and Design Standards for Mixed-Use, Group Living, and Nonresidential Development

2. Accent Colors

a. Historic Crossroads Village All accent colors shall be compatible with the colors found on traditional buildings in the Historic Crossroads Village District. These accent colors range from a deep red and green hues to black. b. Other Districts All accent colors shall complement the primary color palette and should be limited to the awnings, doors, and roof materials. (See Figure 5.9.4.C: Example of Exterior Facade Color.) 3. Window, Awning, Roof Material, Aluminum Storefront, Door Frame and Similar Element Colors The colors of these building features shall be identified, shall complement the primary color palette, and if applicable, shall be identified as an accent color. (Ord. No. 2016-001, 05/10/2016) A. Applicability In addition to the exterior material and color standards Section 5.9.4, Exterior Facade Materials and Colors for All Development, mixed-use, group living, and nonresidential development located outside the Transit-Oriented Development (TOD), Historic Crossroads Village (HCV), and Main Street (MS) districts shall comply with the following building and design standards. B. Facade Wall – Length 1. A facade wall greater than 100 feet in length, measured horizontally, shall: a. Incorporate wall plane projections or recesses having a depth of at least three percent of the length of the longest segment of the facade wall. Said projections or recesses shall extend at least 20 percent of the length of the facade wall. (See Figure 5.9.5.B.1: Wall Plane Projects or Recesses.) b. Not exceed 100 feet in uninterrupted length. 5.9.5. Building and Design Standards for Mixed-Use, Group Living, and Nonresidential Development

Morrisville, NC

February 1, 2021

Unified Development Ordinance

Page 5-69