Morrisville Unified Development Ordinance - May 2020

Article 3: ZoningDistricts Section 3.7. Planned Development Districts 3.7.1. General

5. Conversion Schedule The PD Plan/Agreement shall include a conversion schedule that identifies the extent to which one type of residential use may be converted to another type of residential use and one type of nonresidential use may be converted to another type of nonresidential use. Such conversions may occur if the number of projected trips per day for the PD district development, as identified in the TIA, does not increase. 6. On-Site Public Facilities a. Design and Construction The PDPlan/Agreement shall establish the responsibility of the developer/landowner to design and construct or install required and proposed on-site public facilities in compliance with applicable Town, State, and federal regulations. b. Dedication The PD Plan/Agreement shall establish the responsibility of the developer/landowner to dedicate to the public the rights-of-way and easements necessary for the construction or installation of required and proposed on-site public facilities in compliance with applicable Town, State, and federal regulations. 7. Uses The principal, accessory, and temporary uses allowed in each type of PD district are identified in the use tables in Article 4: Use Standards. Allowed principal uses in a particular PD district shall be established in the PD Plan/Agreement, subject to conversion in accordance with a schedule incorporated in the PD Plan/Agreement in accordance with Section 3.7.1.E.5, Conversion Schedule. Allowed uses shall be consistent with Town plans and the purpose of the particular type of PD district, and subject to applicable use-specific standards in Article 4: Use Standards, and any additional limitations or requirements applicable to the particular type of PD district. 8. Densities/Intensities The densities for residential development and the intensities for nonresidential development applicable in each development area of a PD district shall be as established in the PD Plan/Agreement, and shall be consistent with the Comprehensive Plan, other adopted special area and Town plans, and the purpose of the particular type of PD district. 9. Dimensional Standards The dimensional standards applicable in each development area of a PD district shall be as established in the PD Plan/Agreement, and shall be consistent with the purpose of the particular type of PD district. The PD Plan/Agreement shall include at least the fo llowing types of dimensional standards, unless the PD Plan/Agreement expressly states otherwise:

a. Maximum net density and/or maximum floor area ratio;

b. Minimum net lot area;

c.

Minimum lot width;

d. Maximum lot coverage;

e. Maximum structure height;

f.

Maximum individual building size;

g. Minimum and maximum setbacks; and

h. Minimum setbacks from abutting residential development or residential zoning districts.

(Ord. No. 2015-002, 04/29/2015)

Morrisville, NC

May 26, 2020

Unified Development Ordinance

Page 3-53