Morrisville Unified Development Ordinance – September 2018

Article 2: Administration Section 2.5. Application-Specific Review Procedures 2.5.17. Riparian Buffer Variance

a. A request for a particular use that is expressly, or by inference, prohibited in the zoning district; b. Hardships resulting from factors other than application of requirements of this Ordinance; c. The fact that land or a structure may be utilized more profitably or be more marketable with a Variance; or d. The citing of other nonconforming or conforming uses of land or structures in the same or other zoning districts.

2.5.17. Riparian Buffer Variance See Section 6.6, Variances from Riparian Buffer Regulations.

2.5.18. Stormwater Variance See Section 7.2.5, Stormwater Variances. 2.5.19. Administrative Adjustment A. Purpose

An administrative adjustment is intended to allow minor deviations, or adjustments, to certain dimensional or numerical standards in this Ordinance based on specific criteria. The intent is to provide relief where application of a standard creates practical difficulties in allowing development that otherwise advances the purposes served by the standards of this Ordinance and the Comprehensive Plan, and is compatible with surrounding development. B. Applicability The procedure and standards in this subsection apply to the review of applications for an Administrative Adjustment, which may be submitted and granted for the standards identified in Table 2.5.19.B, Allowable Administrative Adjustments, up to the limits set forth in the table for the type of standard. An application for an Administrative Adjustment may only be submitted and reviewed concurrently with applications for a Special Use Permit, Type 1 Subdivision Preliminary Plat Approval, Type 2 Subdivision Preliminary Plat Approval, Major Site Plan Approval, Minor Site Plan Approval, Construction Plan Approval, Sign Permit, Building Permit, or Certificate of Compliance/Occupancy. Where the concurrently reviewed application is subject to review and approval by the Planning and Zoning Board, Board of Adjustment, or Town Council, Town staff shall review and decide the Administrative Adjustment application before distributing the concurrently reviewed application to the Planning and Zoning Board, Board of Adjustment, or Town Council. (Ord. No. 2016-001, 05/10/2016) Table 2.5.19.B: Allowable Administrative Adjustments Standard Allowable Administrative Adjustment Shape factor 2 percentage points Net lot area, minimum 10 % Lot width, minimum 10 % Lot coverage, maximum 10 % Front setback, minimum 5 % Corner side setback, minimum 15 % Side setback, minimum 15 % Building separation, minimum 30 % Rear setback, minimum 15 % Build-to line, minimum 15 %

September 25, 2018

Morrisville, NC

Page 2-60

Unified Development Ordinance