UDO Adopted Version July 2024

Article 5: Development Standards Section 5.9. Building Configuration and Design 5.9.5. Building and Design Standards for Mixed-Use, Group Living, and Nonresidential Development

3. Window, Awning, Roof Material, Aluminum Storefront, Door Frame and Similar Element Colors The colors of these building features shall be identified, shall complement the primary color palette, and if applicable, shall be identified as an accent color.

(Ord. No. 2016-001, 05/10/2016)

Building and Design Standards for Mixed-Use, Group Living, and Nonresidential Development

5.9.5.

A. Applicability In addition to the exterior material and color standards Section 5.9.4, Exterior Facade Materials and Colors for All Development, mixed-use, group living, and nonresidential development located outside the Historic Crossroads Village (HCV), and Main Street (MS) districts shall comply with the following building and design standards.

B. Facade Wall – Length

1. A facade wall greater than 100 feet in length, measured horizontally, shall:

a. Incorporate wall plane projections or recesses having a depth of at least three percent of the length of the longest segment of the facade wall. Said projections or recesses shall extend at least 20 percent of the length of the facade wall. (See Figure 5.9.5.B.1: Wall Plane Projects or Recesses.)

b. Not exceed 100 feet in uninterrupted length.

Figure 5.9.5.B.1, Wall Plane Projections or Recesses.

2. As an alternative to complying with the facade wall length requirement in subsection 1 above, office buildings may have a minimum of ten corners. (See Figure 5.9.5.C.2: Office Corner Requirement.)

C.

Facade Wall – Expression 1. Facade walls shall include no less than two of the following elements:

Morrisville, NC

July 9, 2024 Page 5-63

Unified Development Ordinance